Flat tow! Which according to the owner's manual I found online can be done so long as you have a 2.7L EcoBoost or 3.5L engine in your 2018 Ford Edge. The parts you need are the following:
- Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-524444-5
- Tow Bar: Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676
- Safety Chains: Roadmaster 68" Single Hook, Coiled Safety Cables # RM-643
- Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267
-... view full answer...
Without knowing specifics I can only speculate but if you have a Blue Ox SwayPro like part # BXW1000 you should have better control over sway so it sounds like you may not have a properly rated system.
In order to choose the best weight distribution system you will first need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your F-250.
The tongue weight is typically between... view full answer...
I reached out to the manufacturer, who told me the Firestone Air Tank, 5 Gallon - (6) 1/2 NPT Ports, (1) 1/4 NPT Port # F9248 is enamel-coated both on the inside as well as the outside.
They also said that the 5-Gallon Air Tank # F9248 is manufactured in the USA. view full answer...
The Thule Camber 4-Bike Rack # TH9056 does come with a lifetime warranty. This means you are totally protected from any defects in workmanship; however, Thule products are among the most high-quality in the industry so the chances this warranty will ever come into play is very slim.
The Camber is a fantastic bike rack that is easy to use and has arms which are spaced apart a full 7", which is more than other hanging racks which means your bikes won't come into contact with each other... view full answer...
We have confirmed with Everchill that the Everchill RV Refrigerator with Freezer # 324-000119 does indeed draw 8-9 amps when starting up, and then 3 amps in order to maintain its set temperature.
I have added a link to a video review for you to check out as well of the Everchill RV Refrigerator with Freezer # 324-000119. view full answer...
I'm not 100 percent sure what you mean by "cylinder" though we do have some door holders for your trailer's entrance door. These partss are add-ons, however, as opposed to replacement parts:
- C-Clip Door Holder - Polar White: 3" # 37210204 or 5-1/2" # 37210374
- C-Clip Door Holder - Zinc Plated Steel: 3" # 37210535
- Plunger and Nylon Socket Door Holder: 1" Long Plunger # DH604 or 3" Long Plunger # DH605
I have added links to video reviews for you to check out as well. view full answer...
The etrailer inventory of the Portable Power Watchdog Surge Protector with Bluetooth and Emergency Shut Down - 50 Amp, # HU87FR is the current model available. This comes with a 3-Year limited warranty. Other sites word their warranty as "Limited Lifetime". But yes, this is the same model. view full answer...
There isn't a way to order replacement lock cylinders with a specific code, and the lock cylinders inside the entry door locks do not have replacement cylinders. So the only way to get the parts keyed alike is to order the Global Link RV Entry Door Locking Latch Kit # 295-000002 at the same time as the Replacement Cam Lock Cylinder for RVs # 295-000003.
Otherwise, you would need to stick with having separate keys for both the entry door and the baggage door. view full answer...
I have another solution but the Brophy Swiveling D-Ring Anchors part # RR6K-4 do not have weep holes designed into them. I agree that they are a great idea and should have them. I have installed these in the past and drilled my own holes to ensure proper drainage I then touched up the holes with clear spray paint to help keep rust away.
The other option which does have weep holes to drain water and has the same capacity but you lose the Swiveling aspect is the etrailer D-Ring Tie Down... view full answer...
The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # SH25VR will not require any additional programming on your 2021 BMW X5. The wiring in this harness is passive so no programming required. You will be able to switch off the parking sensors by using the button on your console or by going through the menu options in the dash. For exact instructions see your owners manual.
Towing is generally preferred in sport mode as it firms the shifts and allows for the engine to go higher... view full answer...
Even though most threads on bolts use right-handed bolts/nuts, some special scenarios warrant a left-handed thread. When wheel accessories like the Phoenix USA Rear Wheel Center Cap - 8-1/4" Hub Diameter - Center Hole Mount - Left Thread # PXQ1020L use a left-handed thread, it is to avoid the added torque from bumps and rough terrain on your wheels. With these forces, right-handed bolts/nuts tend to come loose from those particular movements. For a hub cap, it is recommended to use a left-handed... view full answer...
The EcoHitch Hidden Trailer Hitch Receiver # 306-X7277 does rate a 10 out of 10 on our difficulty rating as it is a very in depth installation. It requires removal of the rear bumper cover and trimming of bumper cover, underbody panel and wire harness holder to properly install the receiver. There are several different tools such as a hack saw, coping saw, reciprocating saw, and a jig saw that would allow you to accomplish the cutting required. You will also need a basic set of hand tools... view full answer...
I have a great solution for you. Even though we do not have pictures of bags/luggage inside the Thule Motion XT # TH629506, we do have the interior dimension to give you the definite measurements that you would be working with. The interior dimensions if the Thule Motion XT 16 are 84-1/2" long x 33" wide x 11-1/4" tall. With these measurements, I recommend measuring the cargo you wish to transport to make sure it would fit.
In order to mount this cargo box on your vehicle, you will need... view full answer...
I went ahead and called my contact at Edge Performance, and he confirmed that the Edge Juice with Attitude CTS2 Performance Tuner EP31507 will run without the egt sensor until the fitting arrives. view full answer...
I have attached some info below regarding the gas consumption of the Excel RV Tankless Water Heater part # EX93FR.
A person can take 133 - 5 minute showers - with a 20lb tank
A family of 4 can take 5 minute showers for a month.
Calculation
1 gallon of Liquid Propane Gas (LPG) converts to 36.39 cubic feet of Propane Gas , there are 4.6 gallons of Propane in a 20lb bottle.
167.4 cubic feet of vaporized propane in a 20lb bottle.
There are 2,523 BTUH in one cubic foot of propane
This... view full answer...
Thanks for the photo, and honestly with so much weight to one side, any cargo carrier is going to tilt, including the 24x60 etrailer Cargo Carrier # e98874. There is something that can help level it out though, which are support straps:
- Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories # 18050
The # 18050 are 61 inch straps, and if you use at one strap both sides of the carrier, or ideally even three with two on the heaviest side and one on the other side, the tilting... view full answer...
Yes; your car hauler trailer has to have an A-frame and be within the correct weight rating, but if so you can definitely use the Demco A-Frame Trailer Coupler # DM14793-52.
The # DM14793-52 has a 10,000 lb capacity so that's the most your loaded trailer can be, but otherwise this will certainly work for a car hauler trailer. view full answer...
Thank you for your purchase from etrailer.com of the Lippert Ground Control 3.0 # LC358590.
What you will need to do is manually set the jacks with the manual override using a 3/8" ratchet, as seen in the directions on page 16. view full answer...
The gears alone cannot be replaced; you would need to replace the entire thing with the Drive Head for Solera Manual Crank-Style Awning # LC300031. view full answer...
The Kat's Heaters Handi-Heat Magnum Magnetic Heater part # KH1190 pulls around 300 watts which you can then use to guesstimate cost. I have attached a formula for you below but we could not accurately inform of cost as there are to many variables at play.
1) Watts รท 1,000 = Kilowatts (kW)
2) Kilowatts (kW) x Hours of Use = Kilowatt Hours (kWh)
3) Kilowatt Hours (kWh) x kWh rate = Cost of Usage view full answer...
Go To Results